S.No | Title of the paper | Name of the Authors | Journal Name | Impact Factor |
---|---|---|---|---|
1 | Improving energy consumption prediction for residential buildings using Modified Wild Horse Optimization with Deep Learning model | Vasanthkumar P, N.Senthilkumar, Koppula Srinivas Rao, Ahmed Sayed Mohammed Metwally, | Chemosphere | 8.943 |
2 | The synergetic effect between hydrogen addition and EGR on cashew nut shell liquid biofuel-diesel operated engine | M. Loganathan, V. Thanigaivelan, | Fuel | 8.035 |
3 | Investigation on the effect of diethyl ether with hydrogen-enriched cashew nut shell (CNS) biodiesel in direct injection (DI) diesel engine | M. Loganathan, V.M. Madhavan, K. Arun Balasubramanian, V.Thanigaivelan, M. Vikneswaran, A. Anbarasu | Fuel | 8.035 |
4 | Improved wild horse optimizer with deep learning enabled battery management system for internet of things based hybrid electric vehicles | Vasanthkumar P, A.R. Revathi, G. Ramya Devi, R.J. Kavitha, A. Muniappan, C. Karthikeyan, | Sustainable Energy Technologies and Assessments | 8 |
5 | Effect of hydrogen and ethanol addition in cashew nut shell liquid biodiesel operated direct injection (DI) diesel engine | V. Thanigaivelan, M. Loganathan, M. Vikneswaran, S. Venkatramanan, M. Manickam | International Journal of Hydrogen Energy | 7.139 |
6 | Thermal and thermo-mechanical studies on seashell incorporated Nylon-6 polymer composites | Vasanthkumar P, R. Balasundaram, N. Senthilkumar, K. Palanikumar, K. Lenin, B. Deepanraj, | Journal of Materials Research and Technology | 6.4 |
7 | Studies on glass/epoxy and Studies on glass/epoxy and basalt/epoxy thin-walled pressure vessels subjected to internal pressure using ultrasonic ‘C’ scan technique basalt/epoxy thin-walled pressure vessels subjected to internal pressure using ultrasonic ‘C’ scan technique | S. Ilangovan, S. Senthil Kumaran , K. Naresh,K. Shankar c,R. Velmurugan | Thin - walled structures | 5.881 |
8 | Pulsed current and dual pulse gas metal arc welding of grade AISI: 310S austenitic stainless steel | Mathivanan, A; Senthilkumar, A ; Devakumaran, K | Defence Technology | 5.1 |
9 | Comparative Study on Mechanical and Metallurgical Properties of AA6061 Aluminum Alloy Sheet Weld by Pulsed Current and Dual Pulse Gas Metal Arc Welding Processes | Mathivanan, A ; Devakumaran, K ; Kumar, A. Senthil | Materials and Manufacturing Processes | 4.783 |
10 | CFD analysis of the effects of flow and thermal oscillations in heat transfer of impinging jet | Dr S. Suyambazhahan S. Sathyanarayanan, S. P. Asok, Sathya Narayanan | Heat transfer | 4.11 |
11 | Influence of Aluminum Silicate and Cerium (IV) Oxide Nanofluid on Pool Boiling Characteristics | Yoganand K, Vasanthkumar P, Poongundran U, Mohanraj M, Jothi Ramalingam R, Hamad Al-Lohedan, Dhaifallah M. Al-dhayan, and Ishwarya Komalnu R | International Journal of Photoenergy | 3.791 |
12 | An Exploratory Study of Direct Injection (DI) Diesel Engine Performance Using CNSL—Ethanol Biodiesel Blends with Hydrogen | V. Thanigaivelan, Lavanya Ramanujam, Rajesh Ravi, Shivaprasad K. Vijayalakshmi, and Manoranjitham Ezhilchandran | Energies | 3.66 |
13 | Investigation on impact strength of friction stud welded AA6061-B4C composite/AISI 1030 steel joints in inert gas atmosphere | Navasingh Rajesh Jesudoss Hynes, Selvaraj Raja, Ramakrishnan Tharmaraj, Michael Brykov and Antoaneta Ene, | Processes | 3.5 |
14 | Flash Pyrolysis Experiment on Albizia odoratissima Biomass under Different Operating Conditions: A Comparative Study on Bio-Oil, Biochar, and Noncondensable Gas Products | C. Sowmya Dhanalakshmi,S. Kaliappan,H.Mohammed Ali,S. Sekar,Melvin Victor Depoures,Pravin P.Patil,Baskara Sethupathy Subbaiah,S. Socrates | Journal of Chemistry | 3 |
15 | Effect of volume fraction on microstructure and wear behavior of dual-phase brass/W surface composites fabricated | S Karpagarajan, C Balamurugan, S Vigneshwaran, El-Sayed I Abdel Aziz | Journal of Materials: Design and Applications | 2.663 |
16 | Finite element simulation and regression modeling of machining attributes on turning AISI 304 stainless steel | Mathivanan, A; Sudeshkumar, MP ; Ramadoss, R ; Ezilarasan, C; Raju, G ; Jayaseelan, V | Manufacturing Review | 2.5 |
17 | DEFORM 3D Simulations and Taguchi Analysis in Dry Turning of 35CND16 Steel | Mathivanan, A ; Swaminathan; Sivaprakasam, P ; Suthan, R ; Jayaseelan, V ; Nagaraj, M | Advances in Material Science and Engineering | 22.1 |
18 | Tensile shear strength prediction of friction melt bonded dissimilar spot joints using RSM | R. Palanivel, S. Vigneshwaran, Y. Alqurashi, M.A. Rasheed | Materiali in tehnologije | 0.65 |